maximis

@maximis
active 1 day, 5 hours ago
Points balance: 112446 pts
  • 1 day, 11 hours ago

    Skindipper

    I’ve just noticed that almost all G3F items of Psychoginger from Renderosity are gone. The two that hurt me most are:
    Rhapsody Dress for G3F
    Rapture for Rhapsody Dress

    which I’ve tried to purchase around Christmas. Any chance that someone here has probably bought that in the past and just forgotten to share? (little hope here *smirk*)

  • 4 days, 6 hours ago

    Skindipper

    Heya, I must say lately I am a bit worried about ironman13 because for an awfully long time I haven’t seen any updates from him/her and I slowly getting afraid that something bad has happened to him/her in RL. I am just asking because I know that some of you here are DAZ are veterans and way longer in this all than me and probably know more.

    • Blazer 4 days, 2 hours ago

      I bought a couple of items from ironman3d over at DAZ that did not deliver as described in the product description and was never updated, so yeah, to say I am disappointed is an understatement. I COULD BE WRONG, but I think this PA is selling stuff under a different name, i3d_Lotus.

      • Blazer 4 days, 2 hours ago

        I meant, ironman13, not 3d

      • Skindipper 4 days, 1 hour ago

        You have a sharp eye, Blazer. That could really be him. I had no idea that i13 had such a bad reputation. I kinda liked his products, but I trust you here. I was just worried that he has been sick or worse.

        • G8M_Belmundo 2 days, 2 hours ago

          what product did he sell? i’m not aware of him or probably i’m missing something. hihihihihi

          • Skindipper 1 day, 12 hours ago

            For me, his most prominent item was the i13 Executive Environment, Outfit and Pose Bundle.

          • wideload 9 hours, 54 minutes ago

            They did a lot of clothing, pose and environment bundles on Daz, usually with the i13 tag at the start of the name. IMO it was usually good quality content but I never actually bought any of their stuff so I can’t speak about after sales support.

            I have noticed that sometimes PA’s do ‘disappear’ for awhile and then release several products in…[Read more]

  • 3 weeks, 5 days ago

    Anna

    It’s a time for celebration and gatherings.

    I wish that all of you may spend your time meaningfully with the people close to your heart;
    May the Peace and Blessings of Christmas be yours;
    May this Christmas holidays give you wonderful time and happiness to become a the golden memories for tomorrow.

    MERRY CHRISTMAS for All!!!

    And I’d like to…[Read more]

    • Blazer 3 weeks, 5 days ago

      Merry Christmas to you too, Anna. Thank you also for your contributions to this community.

    • wideload 3 weeks, 5 days ago

      Merry Xmas to you and to everyone else on this site. May you all have a great time, whatever you celebrate.

    • martian 3 weeks, 5 days ago

      Merry Christmas and a bright happy New Year!

    • agata 3 weeks, 4 days ago

      Everyone who celebrates Christmas today – congratulations on the holiday.

    • G8M_Belmundo 3 weeks, 4 days ago

      MERRY CHRISTMAS TO ALL OF YOU AND TO YOU ANNA K.

    • Dave Harley 3 weeks, 4 days ago

      Merry Christmas and Happy Holidays to you Anna

      Dave H

    • pwnzorlord 3 weeks, 4 days ago

      Likewise Happy Xmas ! Let the Boxing day and New Year sales stuff the site like a Xmas day Turkey!

    • Dave Harley 2 weeks, 2 days ago

      Happy Holidays Anna
      And thanks for the kind words

      Dave H

  • 1 month ago

    moi

    moi Posted an update in General Chat 1 month ago

    Just a bit pissed ๐Ÿ˜‰ i created a render for the x-mas submission. Put many hours in it but i cant render due to vram limitations. How sad

    • myducky666 1 month ago

      that sucks!

    • Anna 1 month ago

      What a pitty! I’d love to see what you created.
      Btw, now, I’m curious….kkkkk

      • moi 1 month ago

        alright maybe i share a screenshot;)

        • Anna 1 month ago

          I’ll wait to see that, my friend. ๐Ÿ˜‰

  • 1 month, 1 week ago

    C

    C Posted an update in General Chat 1 month, 1 week ago

    https://3d-stuff.ru/easy-character-creation-with-facegen/ anyone have this already? how do you get this working in Daz? I am not sure how to get it workable I mean where do I put what files?! could anyone help here please. thx.

    • G8M_Belmundo 1 month, 1 week ago

      I don’t know much of this facegen with daz. I believe it’s a good tutorial.

    • moi 1 month, 1 week ago

      i have used it a vew times but honestly i don’t like it. textures looking misaligned. and color looks other than the torso most of the time

      • C 1 month, 1 week ago

        yeh you didn’t really understand the question… how do I actually get it running in Daz? what do I need to do with what files etc?!

        • moi 1 month, 1 week ago
          • C 1 month, 1 week ago

            yeh but how do you INSTALL it?

            • moi 1 month, 1 week ago

              just install and replace cracked exe. Done
              dont expect its works inside of Daz but its a standalone app

            • C 1 month, 1 week ago

              no all I can find is a load of images and a load of video tutorial files inside the zip. Can’t see any files called ‘cracked exe’. ๐Ÿ™ weird.

            • C 1 month ago

              anyone know?!?!?? could really use help here ๐Ÿ™

            • moi 1 month ago

              back again to this question, Sorry for late response but i have watched an important kickbox match. I tought the problem should be a easy one. But you need to install this first https://3d-stuff.ru/facegen-artist-pro-v1-11/ 64 bit or 32 bit. Just extract those archives. There inside are the cracked exe files. thats it

  • 1 month, 3 weeks ago

    pwnzorlord

    There’s no such thing as a stupid question..tho this gets near it, just reaching out… =)

    Have any of you ever thought..”Wait… I am ADDICTED to collecting and hoarding DAZ content!”

    I think I am ><

    This evening I was doing some retrograde work converting old V4 poses to G2F, then those into G3F…and all new G3F poses back down to G2F……[Read more]

    • Anna 1 month, 3 weeks ago

      Lol, so I’m not the only lunatic addicted in here. What a relief! xD

      I’m addicted as you. I collect movies, series, digital scrapbook kits and since 2014 – Daz/Poser items.

      At the beginning, I wasn’t so organized so I downloaded some double files, but I’m trying to be more organized and I’m still looking for a better way to do that because even…[Read more]

      • pwnzorlord 1 month, 3 weeks ago

        Phew ! SO I am not the only one then! I agree on the “oh that would be nice to render…sometime…” and true you get the random “oh yeah I forgot I had that” then sparks a whole new render idea. Time for me to stop “collecting” and more rendering, I have decided I am stopping at G8 series – G2 and G3 are most versatile for backwards compatibility…[Read more]

        • Anna 1 month, 3 weeks ago

          I agree when you say G2 and G3 are more vesatile, but G8 is pretty new and soon I hope we have the converter items to help use more our stuffs. ๐Ÿ™‚
          I’d love to your renders, I always day that, I know, but I learn something new when I saw great renders or asking to artist how he/she did that. After all we need ask sometimes to learn something. ๐Ÿ˜‰

    • Blazer 1 month, 3 weeks ago

      I can relate. I recently had to obtain 2 of 4 TB EXHD to house my DAZ purchased contents and other 3D store contents, so that just tells you how much 3D contents I have accumulated since discovering DAZ in 2005. One of these EXHD contains 2D stuff as well. Hoarding is never okay, but what can you do, you know? And yes, I have realized time and…[Read more]

      • pwnzorlord 1 month, 3 weeks ago

        Holy Phuck Knuckles ! 8TB of storage for 3D contents ! How on earth do you organise it all ? or to you go “freestyle” and keep it random?

        I think I should go do a “force myself” phase, as I said above for G8 series putting the breaks on a little…I have about 40 good ideas for renders all jotted down (things like a reworking of Salome & head of…[Read more]

        • Blazer 1 month, 3 weeks ago

          1 EXHD houses only DAZ purchased items and the other one houses items from other stores, RDNA, renderosity, hivewired, freebie, etc. And then I have a separate EXHD that houses my installed DAZ contents and Poser runtime folder. Yeah…you would have to have some sort of organized method, or not, after all there is a “search” function.

          • Anna 1 month, 3 weeks ago

            Great way to organize your stuffs. I’d like to had this idea when I start my collection. And I hope I can have so much item as you or at least something like that. ๐Ÿ˜‰

    • martian 1 month, 3 weeks ago

      So it would seem that a lot of us spend a lot of time downloading and organizing stuff… I organize so that I can find what I’m looking for when I need it later, and to that end I still end up forgetting most of what I have unless I come across it. I do all the same things as pwnzorlord and even download all the promos if not already in the…[Read more]

      • pwnzorlord 1 month, 3 weeks ago

        I guess the advantage of being a member here is rather than double up content or forgetting we have stuff is being able to check where we sent points for stuff. Quite often I have found it faster to do a search here rather than on my content! I wish Daz Content browser would show a directories sub-directories thumbnails when viewing (like poser -…[Read more]

  • 2 months ago

    palos

    palos Posted an update in General Chat 2 months ago

    How do I get points. I bought 90 days of premium qtyfiles account a couple of days ago and until now no points on my account to download things.

    • Blazer 2 months ago

      Please send a site message to Bogus.

      • palos 1 month, 4 weeks ago

        Thank you. I already did but he hasnt respond back yet. I’ll try again.

      • palos 1 month, 4 weeks ago

        how to do a site message. I did send a private message to Bogus but not a site message. Please let me know on how to do it. Thank you.

        • Blazer 1 month, 4 weeks ago

          site message/private message one and the same ๐Ÿ™‚

          • palos 1 month, 4 weeks ago

            thank you. I’ll just wait for Bogus response. Have a great evening.

  • 2 months ago

    Anna

    Anna Posted an update in General Chat 2 months ago

    Hello,

    I have another stupid question, as usual ๐Ÿ˜›
    I’m playing with a creation of my own charater, I know how make the shapes, but I can’t figure out how create the data folder. Anyone can help me please?

    Thanks a lot in advance.

    • G8M_Belmundo 2 months ago

      Me, when creating customer character I’m doing it in zbrush or edit in autodesk maya/cinema4D, export them in obj and back to daz3d. Save them as preset character.

      • Anna 2 months ago

        Thank you so much. I really appreciate the tip.
        I don’t know use these other programs. I’m doing all in DAZ and using the morphs kits for G3F, but I’ll finish the morphs here (I’m still make some adjust at face) and try save as preset character and see if it works to me. ๐Ÿ™‚

        • G8M_Belmundo 2 months ago

          honestly, I thought you are related to sveva (vendor), hahahahahaha. coz most of your posts are sv7… you really like her works. I also like her characters. ๐Ÿ˜€

          • Anna 2 months ago

            I’d like to but I’m only a big fan, I really love her items, Seven and Vyktoria are some of my favorites too. Because it I share so much item from them. ๐Ÿ˜‰

  • 2 months, 1 week ago

    myducky666

    how do you age the Toon Generations 2 Essentials for Genesis 3? i can’t find an age dial. what am i missing? any help would be appreciated.

    • Blazer 2 months, 1 week ago

      Once you load the character, go to your parameters>Actor>People>Stylized>Toon Generations

      • myducky666 2 months, 1 week ago

        thank you once again for saving my bacon, Blazer!

  • 2 months, 2 weeks ago

    myducky666

    i have a stupid question. while in daz if you’re working on a pic and install a new set of files, is there a way to refresh to install the new files without saving or closing the program?

    • Blazer 2 months, 2 weeks ago

      What a great question and the answer is YES, indeed! go to your “Content Library” tab and above it there is a small arrow with the drop down list icon, click that and choose “Content Directory Manager” and just click “Accept”. You should see some sort of movement of your folders indicative of “refreshment” of contents.

      • myducky666 2 months, 2 weeks ago

        i cannot thank you enough! i’ve been doing save as every time or shutting down and rebooting the program. a huge thank you for this tip! i had no idea. lol

        • Blazer 2 months, 2 weeks ago

          Glad I could help ๐Ÿ™‚

  • 2 months, 2 weeks ago

    Danno

    I’m so annoyed with the Daz PC+ sale. I as per my seemly yearly tradition have saved up $500 and have painstakingly chosen 45 items (as every vendor was 50% off, my cart had a $490 saving) which we collectively don’t have. It was very time consuming, so I thought I’d buy and upload the next day as I had no work.

    Shocking the next day the every…[Read more]

    • Blazer 2 months, 2 weeks ago

      Thanks for all your recent shares. I wish I had an answer for you, but I don’t really keep track of DAZ sales, heck didn’t even realized they were having such a thing as every vendor at 50% sale. Sometimes there’s too many things happening at DAZ that it just muddles up my brain. I just grab items when they are offered at a good price or put…[Read more]

      • Danno 2 months, 2 weeks ago

        It’s called the P+ catalogue sale. But seemly I’m getting everything, I pushed it all on to my wish list and I’m checking that every morning.

    • G8M_Belmundo 2 months, 2 weeks ago

      you all rock, thank you for your shares. I agree with blazer, and good thing sometimes they are already here. hihihihihihi!

      • Danno 2 months, 2 weeks ago

        Yeah, that’s what takes all the time, 99% of the sale’s already uploaded…

    • Dave Harley 2 months, 2 weeks ago

      I have hear a “Rumor” that Daz may be Up For Sale.
      May have something to do with what happened to you??

      • Danno 2 months, 2 weeks ago

        Maybe, but I think my winging was for nothing. Hope they keep the same policies and forget the DRM if they do get sold.

      • Blazer 2 months, 2 weeks ago

        And pray tell where did you hear this rumor, Dave? I haven’t seen anything in the forums about it.

        • Dave Harley 2 months, 2 weeks ago

          Not at Liberty to say Blazer

  • 2 months, 2 weeks ago

    Anna

    A little question, anyone tested “dForce Summer Dream for Genesis 8 Female(s)” always I tried make simulation in the end the dress got crazy. I’d like to know if somebody had the same issues. ๐Ÿ™‚

    • Blazer 2 months, 2 weeks ago

      My understanding, Anna, is that “dForce” products are ready to simulate. You don’t need to do anything with the setting. Are you loading your clothing on your G8 in their default position? You need to load the clothing while in this position, then pose your character and then simulate.

      • Anna 2 months, 2 weeks ago

        Yes, I was doing exactly it but I was having the issues. ๐Ÿ™

    • moi 2 months, 2 weeks ago

      i have the sam issue Anna. click reset in simulation pane delete cloth prop. Load your cloth prop again. Try to simulate, if this not working some body part might be to close to the body. If thats not the case you need to paint a small weight map on your cloth prop.

      • Anna 2 months, 2 weeks ago

        Thanks a lot for the tips. I’ve tried and worked. ๐Ÿ˜€

    • Blazer 2 months, 2 weeks ago

      I tried it just now and encountered no issues here. I’ve got my character sitting down.

      • Anna 2 months, 2 weeks ago

        Thanks for test it, Blazer. After Moi gaves the tips, I’ve checked my pose and the fingers was so close at body and it probably was making the dress get crazy when was simulating. ๐Ÿ˜€
        I’ll finish my test I’m rendering and then, create a render I was trying before. ๐Ÿ˜‰

    • Anna 2 months, 2 weeks ago

      Again, thanks a lot for all help, @3duser0 and @blazer07070.
      I know sometimes I make a lot of questions, but you are the only people I can ask to end to my doubts. ;D

      • moi 2 months, 2 weeks ago

        You may ask as much as you whant. @annakin. We all need to start somewhere.

        • Anna 2 months, 2 weeks ago

          Thanks a lot, you are a great friend. ๐Ÿ™‚

          • moi 2 months, 2 weeks ago

            Thanks @annakin ๐Ÿ˜‰ Your welcome.

  • 2 months, 2 weeks ago

    agata

    People can not without communication.

    It seems to me that they will go crazy and just simply run wild. After all, a person needs to be listened to, understood. Historical experience shows that isolating a person from a society leads to loss of the human appearance. Communication, both verbal and non-verbal, is useful for a person. It brings him a…[Read more]

    • Blazer 2 months, 2 weeks ago

      Sometimes it’s good to have some peace and quiet and spending a night or 2 alone, however one needs daily interaction and communication with other humans to stimulate the mind, so yes, I agree. People, and even animals cannot do without communication.

    • k2osiris 2 months, 2 weeks ago

      Balanced! All in excess or defect is bad.
      And yes, You can go crazy if you exceed certain limits.
      All ok Agata???

      • wideload 2 months, 2 weeks ago

        Agreed. It’s finding that balance and it could be slightly different for every person and the life you wish to lead. Even if you’re in a relationship, both of you still need that alone time as much as you need time together. I’m not just talking about going out separately either, it includes alone time within the same household. How much that is…[Read more]

      • agata 2 months, 2 weeks ago

        @k2osiris Normally. I’m just interested in the opinion of artists. After all, the work on the project assumes devaluation. Does this mean that in order to achieve harmony, it is necessary to communicate more than, for example, to journalists?

        • k2osiris 2 months, 2 weeks ago

          @agata Can be… for me, yes. I work how graphic designer. Sometimes I work alone, and sometimes with a team. Sometimes from house, and other days in the studio. I have realized that it does not only depend on your team or the project to be carried out. The most important it is your state of mind, and the happiness what you have that day. Yours…[Read more]

    • Anna 2 months, 2 weeks ago

      I agree you with all of you. Balance is the key here.
      Sometimes we are full of everything, including our husband/wife, family, friends and need some time alone only to feel the silence and relax. And it doesn’t need mean go out and stay alone. Watch a tv, listen to music or only lay in the bed in your bedroom and relax. It always is very…[Read more]

    • Skindipper 2 months, 2 weeks ago

      Most of the time when I meet with people, they discuss things that are meaningless to me. I still like to see their smiles, to make a joke or fool around but most of the time, I prefer to stay at home…

  • 2 months, 3 weeks ago

    Anna

    Hello, I’d like to ask for a little help. I’ve installed the new daz to try the new dforce, but I can’t make the simulation and make the clothes more realistics.

    This message appears: ” Could not find a OpenCl device.”

    I know my graphics cards drivers are ok, but I think is missing the OpenGL and I couldn’t find a compatible version to my…[Read more]

    • Blazer 2 months, 3 weeks ago

      there was an upgrade to nvidia drivers (well mine anyways) a couple of weeks ago. Have you upgraded your drivers?

      • Anna 2 months, 3 weeks ago

        I had the same idea of you. It was the first thing I checked again them and they are upgraded. They need be upgraded because the game I always play with my husband. ๐Ÿ˜‰

    • moi 2 months, 3 weeks ago

      Make sure you you set in Simmultion pane Select advanced tab and there you need to select your GPU

      • Anna 2 months, 3 weeks ago

        Thanks, moi. I checked and my GPU didn’t appear there.

    • k2osiris 2 months, 3 weeks ago

      Look this: https://www.daz3d.com/forums/discussion/203081/dforce-start-here#latest
      Come down at this title “Are there any dependencies that I need to be aware of?”
      This says: “In the case of older cards (e.g., GTS 250), the NVIDIA drivers do not support OpenCL 1.2 and so the driver for the CPU must be installed:”

      Install this dependencies “Intel…[Read more]

    • k2osiris 2 months, 3 weeks ago

      Also, you must do, what Moi has told you. “select your default GPU in dforce settings.

    • k2osiris 2 months, 3 weeks ago

      Your graphic card, supports until openGL 2.1. You should not have problems making it work, install this runtime ant try again. Restart your system before.

      • Anna 2 months, 3 weeks ago

        I know my graphic cars supports opneGl 2.1, I went to site of nvidia to confirm, because I couldn’t understand why it was happening. And after spent all yesterday make searches, tries, I found the DAZ forum discussion and saw NVIDIA drivers of my graphic card doesn’t have the OpenGL in its pack. ๐Ÿ™
        So I found the link you sent me at forum, @k2osir…[Read more]

    • Anna 2 months, 3 weeks ago

      I’d like to say thank you so much for all support, if I didn’t discover it by myself, surely with your help I could fix the error I was having here.

      So thank you so much @blazer07070, @3duser0 and @k2osiris. All of you are my heroes. ๐Ÿ˜‰

      • moi 2 months, 3 weeks ago

        Thanks, glad it works properly now.😊

      • k2osiris 2 months, 3 weeks ago

        You are welcome. Iยดam glad to help you.

  • 2 months, 4 weeks ago

    moi

    sometimes when i render a huge scene my computer crashes. i get a black screen and windows reboot. After some research i found a tip that i whant to share with you:
    just read this and if you experienced enough you can walk trough this…[Read more]

    • G8M_Belmundo 2 months, 4 weeks ago

      thanks

    • Anna 2 months, 4 weeks ago

      Great tip, my friend… Thank you so much. ๐Ÿ™‚

  • Load More  

Leaderboard

  1. 1. Kat 1962832 pts
  2. 2. Blazer 1769706 pts
  3. 3. Dmitry 705405 pts
  4. 4. Jenna 559651 pts
  5. 5. myducky666 483861 pts
  6. 6. Norvil 438536 pts
  7. 7. martian 378833 pts
  8. 8. G8M_Belmundo 257665 pts
  9. 9. moi 192899 pts
  10. 10. Anna 192142 pts

Add points

Transfer Points

maximis’s Friends